How To Change A Sprinkler Head

Then take your shovel out and slice about 4 inches into the ground around all 4 sides of the sprinkler head. Before a sprinkler head is removed the sprinkler system has to be drained.

How To Replace A Sprinkler Head Without Digging Youtube

Carefully dig a small hole surrounding the broken head until you reach the PVC pipe feeding the head.

How to change a sprinkler head. The sprinkler system is a bit complex but we need more knowledge about the heads and how to adjust it because there are times we would want to change them. Align the head so it sits straight in the hole as you tamp the dirt with your hand. Check to see if it is loose or not.

Next the professional contractor drains water from the system and out of the building typically using the main drain at the riser. You will either have to tighten it clockwise or loosen it counterclockwise depending on the result you want to achieve. Replace the Sprinkler Head Align the new sprinkler head and rotate it clockwise with the riser in place to connect it to the pipeline.

The quick and easy way to replace both Rainbird and Hunter sprinkler heads in about 5 min or less. Screw on the new sprinkler head. Restart your sprinkler and check to see if the water is properly spraying or not.

For many sprinkler head types youll simply need a screwdriver. Generally the screw is small and can be found on top of the sprinkler. In this video I show you how simple it is to replace a pop up sprinkler.

Replace the sprinkler head. Screw the riser fitting into the irrigation tube then the sprinkler head. Position the female end of the sprinkler head over the male end of the riser and twist it to the right clockwise to install it.

Continue tightening the head by hand until its nice and secure. Turn off the sprinklers and the water supply to sprinklers. This is mainly more important if you want to change the pattern in which it sprinkles water.

As you do that lift up on the shovel once its in to break the bottoms of the roots so that it makes it easier to pull out. The head may unscrew from the riser or the riser may unscrew from the line fitting and either is OK. If the riser remains screwed to the fitting and the damaged sprinkler head was at the right height you can simply screw the replacement head onto it.

Unscrew the Head Nozzle. Even though the water should be off and the system should be. Dig Around the Sprinkler Replacing garden sprinkler heads such as hunter sprinkler heads is an easy and straightforward process.

Jiggle your new sprinkler head a few times to make sure it isnt loose. Raise A Sprinkler Head We think about 2 inches will do in our case. Check your sprinkler head itself to know if you need a flat or Philips screwdriver.

I install a quality K-Rain Pro-S and a Hun. Grasp the housing of the sprinkler head and turn it counterclockwise. Using a shovel dig up a round or square hole until the head nozzle is visible.

Dont call a contractor do it yourself. How to replace a sprinkler head without digging - YouTube. Also includes how to adjust sprinkler heads.

Screw the new head into the flushed water line and begin backfilling the hole. Fast easy way to replace Rainbird and Hunter lawn sprinkler heads without digging and no special tools are needed. Backfill with dirt and sod.

Identify the broken sprinkler by briefly running that circuit and flag it if the head will disappear in your grass. Next they carefully remove the sprinkler head with a wrench being wary of pressurized water behind the head.

How To Repair A Broken Sprinkler Head How Tos Diy